Pinpoint Tests: Notes

NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the Warranty Policy and Procedures manual (section B1.2), or determine if any prior approval Program is in operation, prior to the installation of a new module/component.

NOTE: The built in diagnostics are accessed as follows:

1. With the vehicle at rest, place the ignition switch "ON", or start the engine.
2. Press and hold the TSD in the center at the top of the screen for approximately 5 seconds and then press and hold the TSD at the top left corner of the screen for approximately 5 seconds.
3. A 'Diag PIN Entry' box will appear' Type in the access code 753.
4. Once this code has been accepted the Diagnostic Menu screen will be displayed.