Pinpoint Test M: The vehicle position rotates randomly.
- M1: VEHICLES CURRENT POSITION MARK TURNS ON ITS OWN
Determine if the ignition status was turned to Auxiliary or On, while the vehicle was on a turntable in a parking building etc.
Was ignition status set to Auxiliary or On?
YES: The angular speed of the vehicle at the time of the ignition status change will be logged as the standard value. To re-set the standard value, turn ignition status to 'OFF' then to 'Auxiliary' or 'On' with the vehicle stationary. Re-test the vehicle.
NO: Check and install a new Touch Screen Display (TSD) as required. Refer to the new module/component installation note at top of DTC Index.