LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft - Passive >> Anti-Theft - Passive >> Removal And Installation >> Passive Anti-Theft System (Pats) Module >> Installation

Passive Anti-Theft System (Pats) Module: Installation

  1. Install the PATS module.
    • Connect the electrical connector.
    • Tighten the bolts to 10 Nm (7 lb.ft).
  2. Secure the RH side of the headliner.
    • Carefully secure the clips.
  3. Install the rear headliner trim panel.
    • Secure the clips.
  4. Install the RH passenger assist handles.
    • Install the screws.
    • Install the screw covers.
  5. Install the sun visor retaining clip.
    • Install the screw.
    • Install the screw cover.
  6. Install the RH sun visor.
    • Install the screws.
    • Install the screw covers.
  7. Install the RH C-pillar upper trim panel. Refer to C-Pillar Upper Trim Panel information.
  8. Install the RH B-pillar upper trim panel. Refer to B-Pillar Upper Trim Panel information.
  9. Install the LH A-pillar upper trim panel. Refer to A-Pillar Trim Panel information.
  10. Connect the battery ground cable. Refer to Specifications information.
  11. Initiate a new PATS module using T4.
scientia non olet · About LEMON Manuals