Upper Arm: Removal
- Raise and support the vehicle.
- Remove the wheel and tire.
- Remove the brake tube.
- Disconnect the 2 brake tube unions.
- Remove the brake hose clips and release the hoses.
- Release the brake tube from the clip.
- Disconnect the height sensor link.
- Release the wheel speed sensor lead.
- RH side only: Release the brake pad wear indicator sensor lead.
- Remove the upper arm.
- Loosen the upper arm bolts.
- Mark the position of the bolt in relation to the upper arm.
- Remove the nut and bolt, then release the upper arm from the wheel knuckle.
- Remove the upper arm bolts.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
CAUTION:
Always plug any open connections to prevent contamination.
