Lower Arm Bushing: Removal
NOTE:
The bushings must be replaced in pairs, LH and RH sides.
- Raise and support the vehicle.
- Remove the wheels and tires.
- Remove the LH lower arm. See LOWER ARM .
- Remove the RH lower arm.
- Note the position of the bushing in relation to the lower arm.
- Using a suitable tool, bend over the bush flanges.
- Using a hacksaw, remove the flange from the bushing, making sure the upper arm is not damaged.
- Using the special tools, remove and discard the lower arm rear bushings.
- Using the special tools, remove and discard the lower arm front bushings.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
CAUTION:
The bush flanges need to be removed to allow bush removal.
NOTE:
Take note of the fitted position of the bush.
