Lower Arm Bushing: Installation
- Using the special tools, install the lower arm front bushings
- Using the special tools, install the lower arm rear bushings.
- Check the bumpstop inserts are correctly installed.
- Install the LH lower arm. See LOWER ARM .
- Install the RH lower arm.
- Install the wheels and tires.
- Tighten the wheel nuts to 140 Nm (103 lb.ft).
- Carry out the wheel alignment procedure.
CAUTION:
Make sure the bush is correctly aligned.
CAUTION:
Make sure the correct special tool is used to install the bushings to the correct depth.
CAUTION:
Make sure the bush is correctly aligned.
CAUTION:
Make sure that bumpstop inserts are fitted on both sides of the front bushing prior to installation of the arm. Failure to follow this instruction may result in damage to the bushing.
NOTE:
Bumpstop inserts are installed to both sides of the bushing.
