Brake Disc - (Vehicles With: Standard Brakes): Removal

WARNING: If installing a new brake disc, install new brake pads.

CAUTION: Brake discs must be renewed in pairs.

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

NOTE: The brake pad wear warning indicator sensor must be replaced each time the brake pads are serviced.

WARNING: Make sure to support the vehicle with axle stands.

CAUTION: Do not allow the brake caliper to hang on the brake hose.

CAUTION: LH side: Do not allow the brake caliper to hang on the brake pad wear warning sensor lead.

Remove the brake caliper and anchor plate.
- Remove the brake caliper anchor bolts.
- Tie the brake caliper aside.
Remove the front brake disc.
- Remove the Allen screw.