Brake Pedal And Bracket - (Vehicles With: Automatic Transmission): Installation

Install the brake pedal assembly.
- Position the brake booster to the brake pedal bracket.
- Tighten the nuts to 25 Nm (18 lb.ft).
Secure the wiring harness.
- Secure the clips.
Install the brake pedal clevis pin.
- Install the clip.
Install the brake pedal bracket.
- Tighten the Torx bolts to 10 Nm (7 lb.ft).
- Secure the wiring harness.
Install the instrument panel access panel.
- Secure with the clips.
Install the stoplamp switch. For additional information, refer to: STOPLAMP SWITCH .
Install the headlamp switch. For additional information, refer to: HEADLAMP SWITCH .