LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering >> Power Steering >> Removal And Installation >> Steering Gear - (4.0L) >> Removal

Steering Gear - (4.0L): Removal

    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  1. Raise and support the vehicle.
  2. Remove the radiator access panel.
    • Remove the 4 bolts.
    GJ0013553
  3. Remove the front RH splash shield.
    • Remove the 4 clips.
    GJ0013554
  4. Remove the front LH splash shield.
    • Remove the 4 clips.
    GJ0011928
    5. NOTE: Make sure the steering is in the straight ahead position.
  5. Release the universal joint from the steering gear.
    • Remove and discard the bolt.
    GJ0013555
    6. NOTE: LH illustration shown, RH is similar.
  6. Release both tie-rod end ball joints.
    • Loosen the locknut.
    • Release both track rods from tie rod ends, note the number of turns for installation.
    GJ0013556
  7. Disconnect the pressure lines from the power steering gear.
    • Remove the bolt.
    • Position an absorbent cloth to collect fluid spillage.
    • Remove and discard the O-ring seals.
    GJ0013557
  8. Remove the steering gear high-pressure line.
    • Remove the bolt.
    GJ0013560
  9. Remove the steering gear.
    • Remove the 2 bolts and discard the cage nuts.
    • With assistance, carefully rotate and release the steering gear.
    GJ0013562
scientia non olet · About LEMON Manuals