Power Steering Fluid Reservoir - (4.0L/5.0L/3.0L Diesel): Removal

NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

Disconnect the battery ground cable. Refer to Specifications article.
Siphon the fluid from the power steering reservoir.
Release the power steering fluid reservoir from the bracket.

CAUTION: Before disconnecting or removing the components, make sure the area around the joint faces and connections are clean. Plug open connections to prevent contamination.

NOTE: Some fluid spillage is inevitable during this operation.

Remove the power steering fluid reservoir.
- Position an absorbent cloth to collect fluid spillage.
- Release the hose clips and disconnect the hoses.