LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering >> Power Steering >> Removal And Installation >> Power Steering Pump To Steering Gear Pressure Line >> Installation

Power Steering Pump To Steering Gear Pressure Line: Installation

    All vehicles 

  1. Install the steering gear high-pressure line.
  2. Connect the high-pressure line to the power steering gear.
    • Install the O-ring seal.
    • Attach the power steering gear high-pressure line.
    • Tighten the bolt to 25 Nm (18 lb.ft).

    3. Vehicles with 5.0L engine 

  3. Install the power steering line support brackets.
    • Tighten the nuts to 10 Nm (7 lb.ft).
    • Secure the hose with the clip.

    4. All other engine types 

  4. Install the power steering line support bracket.
    • Tighten the nut to 10 Nm (7 lb.ft).
    • Secure the hose with the clip.

    5. All vehicles 

  5. Connect the high-pressure line to the power steering pump.
    • Install new sealing washers.
    • Connect the power steering pump high-pressure line.
  6. Install the radiator access panel.
    • Tighten the bolts to 10 Nm (7 lb.ft).
  7. Install the front LH fender splash shield. Refer to Fender Splash Shield article.
  8. Install the front RH splash shield.
    • Secure with the clips.
  9. Fill and bleed the power steering system. Refer to Power Steering System Filling and Bleeding article.
scientia non olet · About LEMON Manuals