Defrost Vent/Register Blend Door Actuator - (LHD): Removal
- Remove the glove compartment. Refer to Glove Compartment article.
- Remove the passenger side closing trim panel.
- Release the clip.
- Remove the 2 screws.
- Disconnect the electrical connector.
- Remove the passenger side footwell duct.
- Remove the clip.
- Remove the passenger side footwell duct elbow.
- Remove the 2 Torx screws.
- Remove the defrost vent/register blend door actuator.
- Disconnect the electrical connector.
- Remove the 2 screws.



