LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Control Components >> Control Components >> Removal And Installation >> Driver Side Temperature Blend Door Actuator - (LHD) >> Removal

Driver Side Temperature Blend Door Actuator - (LHD): Removal

  1. Remove the instrument panel driver side reinforcement. Refer to Instrument Panel Driver Side Reinforcement article.
    2. NOTE: RHD illustration shown, LHD is similar.
  2. Remove the driver side footwell duct.
    • Remove the 2 Torx screws.
    GJ0014071
    3. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
  3. Remove the temperature blend door actuator.
    • Disconnect the electrical connector.
    • Remove the 3 screws.
    GJ0014072
scientia non olet · About LEMON Manuals