Heater Core - (RHD): Removal
- Refer to: Cooling System Partial Draining, Filling And Bleeding
- Remove the instrument panel driver side reinforcement. Refer to Instrument Panel Driver Side Reinforcement information.
- Remove the driver side footwell duct.
- Remove the 2 Torx screws.
- Remove the heater core upper and lower pipes.
- Position a container to collect the fluid.
- Loosen the 4 screws and remove the clips.
- Remove and discard the 4 O-ring seals.
- Remove the heater core.
NOTE:
LHD illustration shown, RHD is similar.
