LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Engine (V8 5.0L Petrol) >> Removal & Installation >> Crankshaft Rear Seal >> Installation

Crankshaft Rear Seal: Installation

  1. Install the special tool.

    Rear Crankshaft Seal Installer (303-1442)

    Rear Crankshaft Cover Alignment Tool (303-1443)

    GJ0012812
    2. NOTE: Tighten the bolts in the indicated sequence.
  2. Torque: 11 Nm
    GJ0012813
  3. Torque: 11 Nm
    GJ0012814
  4. See Figure
  5. Connect the battery ground cable. Refer to SPECIFICATIONS information.
scientia non olet · About LEMON Manuals