LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Engine (V8 5.0L Petrol) >> Removal & Installation >> Exhaust Manifold LH >> Installation

Exhaust Manifold LH: Installation

    CAUTION: Make sure that the mating faces are clean and free of foreign material.
    CAUTION: Make sure the anti-seize compound does not contact the catalyst monitor sensor tip.
    CAUTION: If accidentally dropped or knocked install a new sensor.
    CAUTION: Make sure the catalyst monitor sensor wiring harness is not twisted more than 180 degrees and is not in contact with either the exhaust or driveshaft.
    NOTE: If the original sensor is to be installed, apply lubricant meeting specification ESE-M12A4-A to the thread of the sensor.
  1. Torque: 45 Nm
    GJ0012121
    2. NOTE: Install a new gasket.
  2. Exhaust Manifold Installation Guide Pins - Threaded (303-1444-01)
    GJ0012122
    3. NOTE: If a new cylinder head is installed use the special tools in the illustration.
  3. Exhaust Manifold Installation Guide Pins - Unthreaded (303-1444-02)
    GJ0012123
    4. CAUTION: Make sure that new bolts are installed.
    NOTE: Install the spacers in the noted position.
  4. Torque: 10
    GJ0012124
  5. Remove the special tool.
    GJ0012125
    6. CAUTION: Make sure that new bolts are installed.
    NOTE: Install the spacers in the noted position.
  6. Torque: 10 Nm
    GJ0012126
  7. Torque: 18 Nm
    GJ0012127
  8. Torque: 3 Nm
    GJ0012117
  9. Torque: 10 Nm
    GJ0012119
  10. Torque: 10 Nm
    GJ0012118
  11. See Figure
    GJ0012116
  12. See Figure
    GJ0012098
  13. See Figure
    GJ0012115
  14. See Figure
    GJ0012113
  15. See Figure
    GJ0012114
  16. Refer to EXHAUST SYSTEM information.
  17. Refer to POWER STEERING PUMP - 5.0L information.
  18. Install the battery. Refer to BATTERY information.
scientia non olet · About LEMON Manuals