LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Engine (V8 5.0L Petrol) >> Removal & Installation >> Exhaust Manifold RH >> Installation

Exhaust Manifold RH: Installation

  1. Torque: 45 Nm
    GJ0012121
    2. CAUTION: LH illustration shown, RH is similar.
    NOTE: Install a new gasket.
  2. Install the special tool.

    Exhaust Manifold Installation Guide Pins - Threaded (303-1444-01)

    GJ0012122
    3. CAUTION: LH illustration shown, RH is similar.
    NOTE: If a new cylinder head is installed use the special tools in the illustration.
  3. Install the special tool.

    Exhaust Manifold Installation Guide Pins - Unthreaded (303-1444-02)

    GJ0012123
    4. CAUTION: Make sure that new bolts are installed.
    CAUTION: LH illustration shown, RH is similar.
    NOTE: Install the spacers in the noted position.
  4. Torque: 10 Nm
    GJ0012124
    5. CAUTION: LH illustration shown, RH is similar.
  5. Remove the special tool.
    GJ0012125
    6. CAUTION: Make sure that new bolts are installed.
    CAUTION: LH illustration shown, RH is similar.
    NOTE: Install the spacers in the noted position.
  6. Torque: 10 Nm
    GJ0012126
    7. CAUTION: LH illustration shown, RH is similar.
  7. Torque: 18 Nm
    GJ0012127
  8. See Figure
    GJ0012128
  9. See Figure
    GJ0012110
  10. See Figure
    GJ0012108
  11. See Figure
    GJ0012109
  12. See Figure
    GJ0012107
  13. See Figure
    GJ0012105
  14. See Figure
    GJ0012106
  15. Refer to EXHAUST SYSTEM information.
  16. Connect the battery ground cable. Refer to SPECIFICATIONS information.
scientia non olet · About LEMON Manuals