LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Engine (V8 5.0L Petrol) >> Removal & Installation >> Intake Manifold >> Removal

Intake Manifold: Removal

NOTE: Removal steps in this procedure may contain installation details.

Some variation in the illustrations may occur, but the essential information is always correct.

  1. Disconnect the battery ground cable. Refer to SPECIFICATIONS information.
  2. Refer to ENGINE COVER - 5.0L information.
    3. WARNING: Make sure to support the vehicle with axle stands.
  3. Raise and support the vehicle.
  4. See Figure
    GJ0012547
  5. See Figure
    GJ0012816
  6. See Figure
    GJ0012817
  7. See Figure
    GJ0012558
  8. See Figure
    GJ0012818
    9. CAUTION: Be prepared to collect escaping fluids.
    CAUTION: Make sure that all openings are sealed. Use new blanking caps.
  9. See figure
    GJ0012819
  10. See Figure
    GJ0012820
  11. See Figure
    GJ0012821
  12. See Figure
    GJ0012822
  13. See Figure
    GJ0012823
  14. See Figure
    GJ0012824
  15. See Figure
    GJ0012825
    16. NOTE: Remove and discard the O-ring seal.
  16. See figure
    GJ0012826
  17. See Figure
    GJ0012827
  18. See Figure
    GJ0012828
  19. See Figure
    GJ0012829
  20. See Figure
    GJ0012830
scientia non olet · About LEMON Manuals