Intake Manifold: Installation
- Torque: 5 Nm
- Torque: 10 Nm
- Torque: 10 Nm
- Torque: 5 Nm
- Torque: 18 Nm
- See Figure
- See Figure
- See Figure
- See Figure
- See figure
- Torque: 25 Nm
- Torque: 8 Nm
- See figure
-
- Torque: 21 Nm
- See Figure
- See Figure
- See Figure
- See Figure
- Torque: 10 Nm
- Lower the vehicle.
- Refer to ENGINE COVER - 5.0L information.
- Connect the battery ground cable. Refer to SPECIFICATIONS information.
CAUTION:
A new O-ring seal is to be installed.
CAUTION:
Make sure that the mating faces are clean and free of corrosion and foreign material.
CAUTION:
Install new o-ring seals
NOTE:
Do not tighten at this stage.
NOTE:
Do not tighten at this stage.
NOTE:
Remove and discard the blanking caps.
