Engine (V8 5.0L Petrol): Removal: Engine

Special Tool(s) 

	303-1142 Viscous Coupling Wrench
	303-1143 Viscous Coupling Holding Tool

1. Refer to: BODY - (PETROL)
2. See Figure
3. See Figure
4. See Figure
5. See Figure
CAUTION: Be prepared to collect escaping coolant.
6. See figure
7. See Figure
8. See Figure
9. See Figure
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
10. Viscous Coupling Wrench (303-1142)

    Viscous Coupling Holding Tool (303-1143)

11. • Remove and discard the 4 O-ring seals.
CAUTION: Be prepared to collect escaping coolant.
12. See figure
13. See Figure
WARNING: Fluid loss is unavoidable, use absorbent cloth or a container to collect the fluid.
CAUTION: Make sure that all openings are sealed. Use new blanking caps.
14. See figure
15. See Figure
16. See Figure
17. Torque: 25 Nm
18. See Figure
19. See Figure
20. Torque: 25 Nm
21. See Figure
22. See Figure
CAUTION: Only rotate the crankshaft clockwise.
23. • Mark the torque converter and flexplate when removing the last torque converter bolt. Make sure that the alignment mark is visible through the inspection hole.
WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
CAUTION: Be prepared to collect escaping fluids.
24. See figure
25. See Figure
26. See Figure
27. See Figure
NOTE: This step requires the aid of another technician.
28. See figure