Transmission Fluid Cooler: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Raise and support the vehicle.
- Refer to Cooling System Draining, Filling and Bleeding information.
- Refer to Transmission Fluid Level Check information.
- Torque: 16 Nm
- See figure
- Torque: 25 Nm
WARNING:
Make sure to support the vehicle with axle stands.
WARNING:
Be prepared to collect escaping fluids.
CAUTION:
Before disconnecting or removing the components, make sure the area around the joint faces and connections are clean and dry. Plug open connections to prevent contamination.
WARNING:
Be prepared to collect escaping fluids.
