Vehicle On Wheels - Four Post Ramp

WARNING: If the drive shaft(s) are to be disconnected, it will be necessary to raise all four wheels off the ramp in order that the shaft(s) can be rotated. If the wheel free facility is not to be used, raise the vehicle off the ramp using suitable equipment. With the vehicle raised, position axle stands in the positions shown for the front and rear support blocks - see illustration in Jacking. With the axle stands positioned, release the parking brake and select NEUTRAL 'N' in the transmission.

WARNING: Do not push the vehicle backwards and forwards along the ramp in order to gain access to the drive shaft fixings.

Position the vehicle on the ramp with the front and rear of the vehicle equidistant from the ends of the ramp. Chock the wheels, select NEUTRAL in the transmission and where practicable, apply the parking brake.