Maintenance Service Reminder Reset - Procedure 07

NOTE: Make sure Land Rover approved diagnostic equipment is not connected to the vehicle.

Set the ignition to the ON position.
Press the OK button on the right side of the steering wheel controls to access the instrument cluster MAIN MENU.
Press the directional button to select the SERVICE MENU.
Press the directional button to select the last option in the Menu.
Simultaneously press and hold the TRIP button and the DOWN directional button on the right side of the steering wheel controls for 15 seconds, this will reset the service indicator message.
Set the ignition to the OFF position.
Set the ignition to the ON position and check the message has been cleared.
If the message remains, repeat the process.