Roof Opening Panel Alignment
- With the roof opening panel closed, check the alignment of the glass to the roof panel. The glass should be central in its aperture. Profile of sunroof to body:
1. Front edge, set flush or up to 1.0 mm (0.040") low.
1. Rear edge, set flush or up to 1.0 mm (0.040") high.
- Open the roof opening panel blind.
- Loosen the 6 roof opening panel Torx bolts.
- Align the roof opening panel.
- Tighten the Torx screws to 6 Nm (4 lb.ft).
- Close the roof opening panel blind.
