Roof Opening Panel Motor: Removal
- Remove both A-pillar upper trim panels. Refer to A-Pillar Trim Panel
article.
- Remove both B-pillar upper trim panels. Refer to B-Pillar Upper Trim Panel
article.
- Remove the front overhead console.
- Carefully release the 7 clips.
- Disconnect the electrical connector.
- Remove the sun visor.
- Remove the cover.
- Remove the 2 screws.
- Release from the clip.
- Disconnect the electrical connector.
- Repeat the above procedure for the other side.
- Remove the sun visor retaining clip.
- Release the screw cover.
- Remove the screw.
- Repeat the above procedure for the other side.
- Remove the passenger assist handle.
- Release the 2 screw covers.
- Remove the 2 screws.
- Repeat the above procedure for the other side.
- Lower the headliner for access.
- Remove the roof opening panel motor.
- Disconnect the electrical connector.
- Remove the 3 Torx screws.
- Remove the spacer.