Front Parking Aid Camera Wiring Harness - Main Body Section (RHD AWD): Removal
CAUTION:
Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
- Remove the LH front seat. Refer to: Front Seat information.
- Remove the central junction box (CJB). Refer to: Central Junction Box (CJB) information.
- Remove the LH scuff plate trim panel. Refer to: Scuff Plate Trim Panel information.
- Release the wiring harness cover.
- Release the 3 clips.
- Disconnect the electrical connector.
- Disconnect the electrical connector.
NOTE:
The left hand front camera wiring harness connectors are coloured magenta, the right hand front camera wiring harness connectors are coloured blue.
NOTE:
The left hand front camera wiring harness connectors are coloured white, the right hand front camera wiring harness connectors are coloured black.
