LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses >> Wiring Harnesses >> Removal And Installation >> Right Hand Parking Aid Camera Wiring Harness >> Removal

Right Hand Parking Aid Camera Wiring Harness: Removal

CAUTION: Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
  1. Remove the LH front seat. Refer to: Front Seat information.
  2. Repeat procedure for the other side.
  3. Remove the floor console. Refer to: Floor Console information.
  4. Remove the LH scuff plate trim panel. Refer to: Scuff Plate Trim Panel information.
  5. Repeat procedure for the other side.
  6. Release the wiring harness cover.
    • Release the 3 clips.
    GJ0014341
  7. Repeat procedure for the other side.
  8. Remove the RH cowl side trim panel. Refer to: Cowl Side Trim Panel information.
  9. Remove the accelerator pedal assembly. information.
  10. Remove the dynamic response module.
    • Remove the 2 bolts.
    • Disconnect the 2 electrical connectors.
    GJ0014342
  11. Disconnect the 2 electrical connectors.
    • Release the 3 clips.
    GJ0014343
  12. Disconnect the 2 electrical connectors.
    • Release the clip.
    GJ0014344
  13. Release the wiring harness cover.
    • Reposition the floor covering for access.
    • Using a suitable tool, carefully cut though the wiring harness cover retaining tape.
    • Release the 12 clips.
    GJ0014345
    14. NOTE: Door shown removed for clarity.
    NOTE: Left-hand shown, right-hand similar.
  14. Release the gaiter.
    GJ0014346
    15. NOTE: Left-hand shown, right-hand similar.
  15. Remove the wiring harness cover.
    • Release the 4 clips.
    GJ0014347
    16. NOTE: Left-hand shown, right-hand similar.
  16. Disconnect the electrical connector.
    • Release the electrical connector bracket.
    • Release the 6 clips.
    GJ0014348
  17. Disconnect the electrical connector.
    GJ0014349
scientia non olet · About LEMON Manuals