LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses >> Wiring Harnesses >> Removal And Installation >> Parking Aid Camera Signal Filter >> Removal

Parking Aid Camera Signal Filter: Removal

NOTE: Identify the correct parking aid camera wiring harness:
  • The LH front camera has white connectors.
  • The rear camera has blue connectors.
  • The LH side view camera has green connectors.
  • The RH front camera has black connectors.
  • The RH side view camera has magenta connectors.
  1. Re-position the LH front seat to the full forward and full height position.
    2. CAUTION: Make sure that the camera wiring harness and link leads are not bent excessively during these procedures. Failure to follow this instruction may result in damage to the harness.
    CAUTION: Make sure that any tie straps used are not tightened excessively on the camera wiring harness and link leads, Failure to follow this instruction may result in damage to the harness.
  2. Take care when handling the wiring harness and link lead.
    GJ0014332
    3. NOTE: RH front camera shown, other parking aid cameras similar.
    NOTE: LH front seat shown removed for clarity.
  3. Disconnect the appropriate electrical connector.
    GJ0014389
scientia non olet · About LEMON Manuals