Front Parking Aid Camera Wiring Harness - Bumper Section: Installation
- Install the wiring harness
- Connect the electrical connector.
- Using suitable tie straps, secure the camera overlay wiring harness to the bumper wiring harness.
- Install the front bumper cover. Refer to: Front Bumper Cover information.
CAUTION:
Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
NOTE:
Left-hand shown, right-hand similar.
CAUTION:
Make sure that excessive force is not used when installing the tie straps to the wiring harness. Failure to follow this instruction may result in damage to the vehicle.