Rear Parking Aid Camera Wiring Harness - Liftgate Section: Removal
CAUTION:
Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
- Remove the rear headliner trim panel.
- Release the 7 clips.
- Disconnect the electrical connector.
- Disconnect the electrical connector.
- Remove the liftgate lower trim panel. Refer to: Liftgate Trim Panel information.
- Remove the liftgate upper trim panel.
- Release the 4 clips.
- Remove the liftgate side trim panel.
- Release the 5 clips.
- Disconnect the electrical connector.
- Release the liftgate conduit.
