LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses >> Wiring Harnesses >> Removal And Installation >> Side Parking Aid Camera Wiring Harness - Front Door Section >> Removal

Side Parking Aid Camera Wiring Harness - Front Door Section: Removal

  1. Remove the closing trim panel.
    • Release the clip.
    • Remove the 2 screws.
    • Disconnect the electrical connector.
    GJ0013955
  2. Remove the cowl side trim panel. Refer to: Cowl Side Trim Panel information.
    3. NOTE: RHD shown, LHD is similar.
  3. If equipped, remove the dynamic stability control module.
    • Disconnect the 2 electrical connectors.
    • Remove the 2 bolts.
    GJ0014342
    4. NOTE: Door shown removed for clarity.
  4. Release the gaiter.
    GJ0014346
  5. Remove the wiring harness cover.
    • Release the 4 clips.
    GJ0014347
  6. Disconnect the electrical connector.
    • Release the electrical connector bracket.
    • Release the 6 clips.
    GJ0014348
  7. Remove the front door trim panel. Refer to: Front Door Trim Panel information.
  8. Disconnect the electrical connector.
    GJ0014407
scientia non olet · About LEMON Manuals