LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Quick Lookups >> Technical Bulletins >> Technical Service Bulletins >> Other Variant >> Accessories Control Systems >> Navigation System Defaults To A Regional Location (LTB00642V2)

Navigation System Defaults To A Regional Location (LTB00642V2)

WARNING: This page is about the LR4 Base, which is a different variant/trim than selected.
Publication date: 2015-11-02
Reference number: LTB00642V2
Supersedes refnos: LTB00642NAS1, LTB00642NAS2

NAVIGATION SYSTEM DEFAULTS TO A REGIONAL LOCATION

NAVIGATION SYSTEM DEFAULTS TO A REGIONAL LOCATION

TECHNICAL SERVICE BULLETIN

Reference Number(s): LTB00642NAS2, Date of Issue:  November 2, 2015
LAND ROVER: 2012-2014 LR4 (LA), Range Rover Evoque (LV); 2013-2014 Range Rover (LG), LR2 (LF); 2012-2013 Range Rover Sport (LS)
SECTION: 415-00
AFFECTED VEHICLES: LR4 (LA) Model Year: 2012-2014 VIN: 596988-704986 Manufacturing Plant: Solihull; Range Rover Evoque (LV) Model Year: 2012-2014 VIN: 000447-877530 Manufacturing Plant: Halewood; Range Rover (LG) Model Year: 2013-2014 VIN: 001204-154250 Manufacturing Plant: Solihull; LR2 (LF) Model Year: 2013-2014 VIN: 343863-392826 Manufacturing Plant: Halewood; Range Rover Sport (LS) Model Year: 2012-2013 VIN: 717166-814822 Manufacturing Plant: Solihull
NOTE: This reissue replaces all previous versions. Please destroy all previous versions.

CONDITION SUMMARY

Situation:  On start-up, the Navigation system may experience either an intermittent or permanent concern as described below.

  1. Intermittent: 
    • The current vehicle position displayed is 'Washington D.C and not the actual current position. Once a GPS signal is acquired, the current vehicle position will then be correctly displayed.
    • Route Guidance is not affected during this intermittent fault mode; if the issue occurred during Route Guidance, the current route will continue to be displayed.
  2. Permanent: 
    • The current vehicle position displayed is 'Washington D.C and not the actual current position. The current vehicle position will continue to be incorrectly displayed as 'Washington D.C following an ignition cycle ('OFF' / 'ON').
    • Route Guidance is affected during this permanent fault mode; if the issue occurred during Route Guidance, the current route will not resume and the destination will be cancelled.
    • All Previous Destinations will be deleted (button 'grayed out').

Cause:  These may be caused by a software issue or hard fault with the Integrated Audio Module (IAM).

Action:  Should a customer express this concern, follow appropriate Service Instruction [A or B] outlined below.

  1. Intermittent:  update the Integrated Audio Module (IAM) software.
  2. Permanent:  replace the Integrated Audio Module (IAM).

PARTS

NOTE: refer to Microcat for any updates to these part numbers.
PARTS INFORMATION

LR079510 Integrated Audio Module - NAS Quantity: 1

TOOLS

NOTE: this 'Active Bulletin' will display a functional programming shortcut if accessed within a diagnostic session using SDD.

SDD with latest DVD and Calibration File; first available on DVD142.06 v.215

Jaguar Land Rover-approved Midtronics battery power supply

WARRANTY

NOTE: the Integrated Audio Module (IAM) may be also referred to as the Audio Control Module (ACM).
NOTE: Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to TOPIx to obtain the latest repair time.
NOTE: DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
DESCRIPTION SRO TIME (HOURS) CONDITION CODE CAUSAL PART
Update Integrated Audio Module software 86.90.37  0.7 42 LR052071
Integrated Audio Module - Renew - LR2 (L359) 86.50.81  0.4 42 LR052071
Integrated Audio Module - Renew - LR4 (L319) 86.50.81  1.1 42 LR052071
Integrated Audio Module - Renew - Range Rover Evoque(L538) 86.50.81  0.4 42 LR052071
Integrated Audio Module - Renew - Range Rover Sport (L320) 86.50.81  0.6 42 LR052071
Integrated Audio Module - Renew - Range Rover (L405) 86.50.81  0.5 42 LR052071
NOTE: Normal Warranty procedures apply.

SERVICE INSTRUCTION A

NOTE: Service Instruction 'A' to be performed on vehicles exhibiting the intermittent issue [A].
CAUTION: a Jaguar Land Rover-approved Midtronics battery power supply must be connected to the vehicle battery during SDD diagnosis / module programming.
NOTE: SDD must be loaded with DVD142.06 v.215 or later.
  1. Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle battery.
    NOTE: the Integrated Audio Module (IAM) may be also referred to as the Audio Control Module (ACM).
  2. Turn ignition 'ON' (engine not running).
  3. Connect the Symptom Driven Diagnostics (SDD) system to the vehicle and begin a new session.
  4. Follow the on-screen prompts, allowing SDD to read the VIN and identify the vehicle and initiating the data collect sequence.
  5. Select 'Diagnosis' from the Session Type screen.
  6. Select the 'Selected Symptoms' tab, and then select:
    • Electrical - Information and entertainment system - Navigation system
  7. Select 'continue'.
  8. Select the 'Recommendations' tab, and then select 'Run'  to perform the 'Configure existing module - Audio front control module' option.
  9. Follow all on-screen instructions to complete this task.
  10. Exit the current session.
  11. Disconnect the SDD and the battery power supply from the vehicle.

SERVICE INSTRUCTION B

NOTE: Service Instruction 'B' to be performed on vehicles exhibiting the permanent issue [B].
  1. Replace the Integrated Audio Module (see TOPIx Workshop Manual, section 415-01).
scientia non olet · About LEMON Manuals