Tailgate Switch Harness Corrosion. Pre 14MY Vehicles Only (SSM72233)
WARNING: This page is about the LR4 Base, which is a different variant/trim than selected.
Publication date: 2015-06-16Reference number: SSM72233
TAILGATE SWITCH HARNESS CORROSION. PRE 14MY VEHICLES ONLY
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM72233, Date of Issue:
16-Jun-2015
| LAND ROVER: | LR4/L319 |
| CATEGORY: | Body |
SERVICE INFORMATION
Symptom 112000 Latches/Locks & Security
Content
ISSUE
The tailgate will not open from the exterior tailgate switch.
CAUSE
The wires to the switch have corroded and are possibly broken.
ACTION
A new switch is available with improved wire material.
If you have this failure you should fit the new part from this list.
PART NUMBER DESCRIPTION
| Description | Original part number | New part number |
|---|---|---|
| Tailgate switch assembly, less camera | LR015457 | LR071910 |
| Tailgate switch assembly, fixed camera | LR015458 | LR071911 |
| Tailgate switch assembly, surround camera system | LR015459 | LR071912 |
Two additional parts are now available. Whenever possible the low level switch and harness listed above should be used.
Original part number CXB000456PVJ new part number LR073594 Ebony black complete handle assembly to include Land Rover badge and switch
Original part number LR014482 new part number LR073593 Primed complete handle assembly to include Land Rover badge and switch
Microcat will be updated at the earliest opportunity.
NOTE:
From 14my onwards all production vehicles are fitted with the improved wire material.