VCT SOLENOID DOES NOT FIT THE VEHICLE HARNESS - 3l AJ126 AND 5L AJ133 (SSM72149)
WARNING: This page is about the LR4 Base, which is a different variant/trim than selected.
Publication date: 2015-05-27Reference number: SSM72149
VCT SOLENOID DOES NOT FIT THE VEHICLE HARNESS - 3l AJ126 AND 5L AJ133
TECHNICAL SERVICE BULLETIN
Reference Number(s): SSM72149, Date of Issue:
27-May-2015
| LAND ROVER: | LR4 / L319, Range Rover / L322, Range Rover / L405, Range Rover Sport / L320, Range Rover Sport / L494 |
| CATEGORY: | Driveability |
SERVICE INFORMATION
Symptom 608000 Runs Rough
Attachments 112.pdf (112.pdf)
ISSUE
Content
A new VCT solenoid has been fitted to a 3.0L AJ126 or 5.0L AJ133 engine which requires a link harness in order to be installed on vehicles built with the prior part.
CAUSE
The VCT solenoid design changed, and the electrical connector on the VCT solenoid is a different size.
ACTION
A link harness is available, part number LR061705, to join the existing vehicle harness to the new VCT solenoid connector.
Please refer to attachment 1.pdf
- If the VCT solenoid to be replaced looks like part 'A' then a link harness is not needed.
- If the part to be replaced looks like part 'B' please also order a link harness.