Power Steering Pump - (4.0L): Removal
- Disconnect the battery ground cable. Refer to Specifications article.
- Remove the accessory drive belt.
- Clamp the power steering pump supply hose to minimize fluid loss.
- Disconnect the high pressure line at the steering pump union.
- Position an absorbent cloth to collect fluid spillage.
- Disconnect the power steering pump supply hose.
- Release the clip.
- Remove the power steering pump.
- Remove the 3 bolts.
CAUTION:
Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
NOTE:
Some oil spillage is inevitable during this operation.
