Fluid Levels

Brake fluid reservoir

Courtesy of JAGUAR CARS, INC.

1. Remove the auxiliary battery box cover.

2. Check the fluid level in the brake fluid reservoir, the level must be to the 'MAX' mark on the reservoir; top-up if necessary.

3. Clean the area around the reservoir filler cap, remove cap.

4. If necessary, top-up using the recommended fluid to the 'MAX' mark on the reservoir. Refer to Specifications .

5. Install the reservoir filler cap.

6. Install the auxiliary battery box cover.

Power steering fluid reservoir

Courtesy of JAGUAR CARS, INC.

CAUTION: To prevent over filling, check/top-up the system with the engine switched off and the system cold. Make sure that the steering wheel is in the straight ahead position, do not turn the steering wheel prior to checking the fluid level.

1. Check that the fluid level is to the mid-way mark between the 'MAX' and 'MIN' marks on the fluid reservoir, top-up if necessary.

2. Clean the area around the reservoir filler cap, remove cap.

3. If necessary, top-up using the recommended fluid to the mid-way mark on the reservoir. Refer to Specifications . .

CAUTION: Do not fill reservoir above the 'MAX' mark.

4. Install the reservoir filler cap.

Windshield washer reservoir

Courtesy of JAGUAR CARS, INC.

1. Remove the windshield washer reservoir filler cap.

2. Top-up the reservoir using a mixture of an approved windshield washer fluid and water until the level is to the bottom of the gauze filter in the reservoir filler neck.

3. Install the reservoir filler cap.