Front Airbag Deployment - Driver And Passenger
CAUTION:
If the front airbags are deployed, the following components must be replaced:
- Driver airbag module
- Passenger airbag module
- Fly leads (where applicable) connecting front airbag modules to SRS harness
- Front seat belt buckle pre-tensioner
- Rear seat belt pre-tensioners - if installed
- Driver's seat belt retractor - if installed
- Clock spring
- Any front impact sensors that have been physically damaged or if a fault is being registered
- Restraints control module (RCM) if the three crashes/impacts have been stored
Additionally, the following items must be inspected for damage and replaced as necessary:
- Front passenger's seat belt retractor and webbing, tongue latching function, 'D' loop and body anchorage point
- Rear seat belt buckles, webbing, buckle covers, body anchorage points and tongue latching function
- Instrument panel molding adjacent to passenger airbag module
- Steering wheel
- Front seat frames and head restraints
- Steering column - if adjustment is lost or if there are signs of collapse
- Seat belt height adjusters
- Rear seat belts
Side Air Bags
CAUTION:
If the side curtain air bags are deployed, the following components must be replaced on the side of the vehicle on which the deployment occurred:
- Side curtain airbag
- Any side impact sensors that have been physically damaged or if a fault is being registered
- Restraints Control Module (RCM) if the three crashes/impacts have been stored
Additionally, the following items must be inspected for damage and replaced as necessary:
- Front seat belts, retractors and webbing, tongue latching function, 'D' loop and body anchorage points
- Rear seat belt buckles, webbing, buckle covers, tongue latching function, and body anchorage points
- Front seat frame and head restraints
- Door trim casing
- Seat belt height adjusters
- Rear seat belts
Head airbag modules
CAUTION:
If the head airbag modules are deployed, the following components must be replaced on the side of the vehicle on which the deployment occurred:
- Head airbag modules
- Link lead between airbag gas generator and restraints control module (RCM) harness
- Airbag retaining clips
- Internal trim finisher
- Front seat belt buckle pre-tensioners
- Any side impact sensors that have been physically damaged or if a fault is being registered
- Restraints Control Module (RCM) if the three crashes/impacts have been stored
Additionally, the following items must be inspected for damage and replaced as necessary:
- Headlining
- Component mounting brackets
- Front seat belts, retractors and webbing, tongue latching function, 'D' loop and body anchorage points
- Rear seat belt buckles, webbing, buckle covers, tongue latching function, and body anchorage points
- Adjacent trim components
- Seat belt height adjusters
Rear impacts
CAUTION:
If the seat belt pre-tensioners are deployed during a rear impact, the following components must be replaced:
- Seat belt pre-tensioners
- Front and rear seat belt retractors used during the impact
- Restraints Control Module (RCM) if the three crashes/impacts have been stored
Additionally, the following items must be inspected for damage and replaced as necessary:
- Seat belt height adjusters
- Front seat belts, retractors and webbing, tongue latching function, 'D' loop and body anchorage points
- Rear seat belt buckles, webbing, buckle covers, tongue latching function, and body anchorage points