LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches & Entry Systems >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Rear Door Latch >> Installation

Rear Door Latch: Installation

  1. Connect the door exterior handle mechanism cable to the door latch.
    • Connect the cable to the lever.
    • Secure the cable to the abutment bracket.
  2. Install the remote control cable to the door latch.
    • Connect the cable to the lever.
    • Secure the cable to the abutment bracket.
  3. Set the exterior handle mechanism.
    • Rotate the lever.
    • Engage the retaining tang.
    GJ0014635
  4. Install the rear door latch assembly.
    • Tighten the Torx screws to 10 Nm (7 lb.ft).
    • Connect the electrical connector.
  5. Install the door exterior handle mechanism.
    • Position the mechanism to the door.
    • Fit the locking pin.
    • Install and tighten the Torx screws.
  6. Position the remote control cable to the door.
    • Install the grommet.
  7. Install the rear door exterior handle. See EXTERIOR REAR DOOR HANDLE .
  8. Install the rear door window motor and regulator assembly. Refer to Rear Door Window Regulator and Motor .
scientia non olet · About LEMON Manuals