Parking Aid System On-Board Self-Test
As part of the strategy of the system if any DTCs are detected, a long high-pitched tone approx 3 seconds will sound and the parking aid switch (where fitted) indicator LED will flash 6 times at ignition on.
- If a fault is present when the parking aid system is activated then the parking aid switch (where fitted) status LED will flash 6 times indicating an issue with front or rear parking aid sensors, wiring, switch, parking aid control module or hard wired sounders.
- The rear parking aid sounder/rear audio system will emit an error tone for approx 3 seconds at ignition on if a fault is detected with the front or rear sensors, the switch, or if there is a controller area network (CAN) bus error.
- (Only applicable to vehicles fitted with front parking aid system and a hard wired rear parking aid sounder). If there is a fault with the rear parking aid sounder the error tone will come from the front parking aid sounder unit (integral with the instrument cluster).
Audible and Visual Warnings when Parking Aid System is in Error State
| Rear Parking Aid System Fitted and No Parking Aid Switch Fitted | Rear Parking Aid System Fitted and Parking Aid Switch Fitted | Front and Rear Parking Aid System Fitted with Parking Aid Switch Fitted |
| A long high-pitched error tone will sound at ignition on for approx 3 seconds | A long high-pitched error tone will sound at ignition on for approx 3 seconds and the parking aid switch indicator LED will flash 6 times at ignition on. Every time the parking aid system is activated within the same ignition cycle, parking aid switch indicator LED will flash 6 times | A long high-pitched error tone will sound at ignition on for approximately 3 seconds and the parking aid switch indicator LED will flash 6 times at ignition on. Every time the parking aid system is activated within the same ignition cycle the parking aid switch indicator LED will flash 6 times |