LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seating >> Seating >> Removal And Installation >> Rear Seat Backrest Cover - (Vehicles With: 40/20/40 Split Seat) >> Installation

Rear Seat Backrest Cover - (Vehicles With: 40/20/40 Split Seat): Installation

  1. Install the rear seat backrest cover.
    • Install the 16 hog rings.
    • Attach the 4 clips.
  2. Install the rear seat backrest assembly.
    • Tighten the Torx bolts to 45 Nm (33 lb.ft).
  3. Connect the backrest heater mat electrical connector.
    • Attach the rear seat cushion side clip.
  4. Install the rear seat release handle finisher.
    • Tighten the screw.
  5. Install the rear seat release handle.
  6. Install the rear seat head restraint retaining clips.
  7. Install the rear seat head restraint.
  8. Install the luggage strap tether.
  9. Install the rear seat cushion side finisher.
    • Tighten the screws.
  10. Install the outer backrest hinge cover.
    • Tighten the screws.
    • Tighten the screw.
  11. Install the inner backrest hinge cover.
    • Attach the clips.
    • Tighten the screw.
    • Attach the backrest cover side clip.
scientia non olet · About LEMON Manuals