Rear Quarter Trim Panel: Removal
- Fold down the rear seat backrest.
- Release the door aperture weatherstrip.
- Release the safety belt anchor.
- Remove and discard the bolt.
- Release the tailgate aperture seal.
- Remove the support spigot from the tailgate.
- Release the clip.
- Remove the rear quarter trim panel.
- Remove the Torx screw.
- Lift the storage box lid and using a firm grip, release the window clips by pulling the trim inboard.
- Release the remaining 6 plastic clips using a suitable tool.
- Disconnect the 2 electrical connectors.
- Remove the stowage tray.
- Release the cover.
- Remove the audio control switch.
- Release the 2 clips.
- Remove the accessory socket.
NOTE:
Do not disassemble further if the component is removed for access only.





