LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches & Entry Systems >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Front Door Latch >> Installation

Front Door Latch: Installation

  1. LH side: Connect the door lock cylinder cable to the door latch.
    • Connect the cable to the lever.
    • Secure the cable to the abutment bracket.
  2. Connect the door exterior handle mechanism cable to the door latch.
    • Connect the cable to the lever.
    • Secure the cable to the abutment bracket.
  3. Install the remote control cable to the door latch.
    • Connect the cable to the lever.
    • Secure the cable to the abutment bracket.
  4. Set the exterior handle mechanism.
    • Rotate the lever.
    • Engage the retaining tang.
    GJ0014635
  5. Install the front door latch assembly.
    • Tighten the Torx screws to 10 Nm (7 lb.ft).
    • Connect the electrical connector.
  6. Install the door exterior handle mechanism.
    • Position the mechanism to the door.
    • Fit the locking pin.
    • Fit and tighten the Torx screw.
  7. LH side: Position the control cables into the retainers.
  8. Position the remote control cable to the door.
    • Install the grommet.
  9. Install the front door exterior handle. See EXTERIOR FRONT DOOR HANDLE .
  10. Install the window motor and regulator assembly. Refer to Front Door Window Regulator and Motor .
scientia non olet · About LEMON Manuals