Rear Door Latch: Removal
- Remove the rear door window motor and regulator assembly. Refer to Rear Door Window Regulator and Motor .
- Remove the rear door exterior handle. See EXTERIOR REAR DOOR HANDLE .
- Release the remote control cable.
- Release the grommet.
- Release the door exterior handle mechanism.
- Remove the 2 Torx screws.
- Remove the locking pin.
- Remove the rear door latch assembly.
- Disconnect the electrical connector.
- Remove the 3 Torx screws.
- Remove the door latch remote control cable.
- Release the cable from the abutment bracket.
- Remove the cable from the lever.
- Release the exterior door handle mechanism cable from the door latch.
- Release the cable from the abutment bracket.
- Remove the cable from the lever.
CAUTION:
Release the exterior door handle and screw cover clips from inside the door.
NOTE:
Do not disassemble further if the component is removed for access only.


