Hood Switch: Installation
- Install the hood switch.
- Install the RH hood latch.
- Connect the electrical connector.
- Tighten the Torx bolts to 10 Nm (7 lb.ft).
- Open and close the hood to check the hood latch operation.
- Adjust the hood latch.
- Loosen the 2 hood latch Torx bolts.
- Lower the hood and check for alignment.
- Open the hood and tighten the Torx bolts to 10 Nm (7 lb.ft).
- Check for the correct operation of the hood safety catch.
- If necessary, repeat the above adjustment procedure.