| Tail / license plate lamp(s) inoperative |
- Bulb failure
- Fuse(s) blown
- Tail / license plate lamp(s) circuit short circuit to ground, open circuit, high resistance
- Lighting control switch fault
|
- Check the bulb condition
- Check the fuse condition
- Refer to the electrical circuit diagrams and test the tail / license plate lamp(s) circuit for short circuit to ground, open circuit, high resistance
- Test the operation of the lighting control switch
- Using the manufacturer approved diagnostic system, check the Central Junction Box (CJB) for related DTCs and refer to the relevant DTC index
|
| Tail / license plate lamp(s) dim |
- Incorrect bulb rating
- Tail / license plate lamp(s) circuit high resistance
- Lighting control switch fault
|
- Check the bulb condition and rating
- Refer to the electrical circuit diagrams and test the tail / license plate lamp(s) circuit for high resistance
- Test the operation of the lighting control switch
|
| Tail / license plate lamp(s) stuck on |
- Tail / license plate lamp(s) circuit short circuit to power
- Lighting control switch fault
|
- Refer to the electrical circuit diagrams and test the tail / license plate lamp(s) circuit for short circuit to power
- Test the operation of the lighting control switch
- Using the manufacturer approved diagnostic system, check the Central Junction Box (CJB) for related DTCs and refer to the relevant DTC index
|
| Tail / license plate lamp(s) inoperative when the automatic headlamp switch option is selected |
- Fuse(s) blown
- Lighting control switch fault
- Autolamps circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Rain/Light sensor fault
- Rain/light sensor LIN circuit fault
|
- Check the fuse(s)
- Test the operation of the lighting control switch
- Refer to the electrical circuit diagrams and test the autolamps circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Refer to the electrical circuit diagrams and test the rain/light sensor power and ground circuits for open circuit, high resistance
- Refer to the electrical circuit diagrams and test the rain/light sensor LIN circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Using the manufacturer approved diagnostic system, check the Central Junction Box (CJB) for related DTCs and refer to the relevant DTC index
|