Pinpoint Test G : The touch switches do not respond.
- G1: TOUCH SWITCH TEST
The touch switches not responding on the navigation screen only
Are the touch switches not responding on the navigation screen only?
YES: Proceed to the next step.
NO: Check and install a new Touch Screen Display (TSD) as required. Refer to the new module/component installation note at top of DTC Index.
- G2: TOUCH SWITCH CHECK
Carry out the touch switch check in the display diagnostics.
Are the results of the display diagnostics touch switch check normal?
YES: Check the symptoms again. Operation is normal.
NO: Go to step 3.
- G3: START CALIBRATION ROUTINE
Carry out the start calibration routine from the display diagnostics touch switch test.
Is normal operation resumed after correction?
YES: Operation is normal.
NO: Check and install a new Touch Screen Display (TSD) as required. Refer to the new module/component installation note at top of DTC Index.