Rear Quarter Trim Panel: Installation
- Install the accessory socket.
- Install the audio control switch.
- Install the stowage tray.
- Install the rear quarter trim panel.
- Install the clips.
- Tighten the Torx screw to 8 Nm (6 lb.ft).
- Connect the electrical connector.
- Install the support spigot to the tailgate.
- Install the tailgate aperture seal.
- Install the safety belt anchor.
- Tighten the Torx bolt to 40 Nm (30 lb.ft).
- Install the door aperture weatherstrip.
- Return the seat backrest to the upright position.