Rear Seat Cushion Cover - (Vehicles With: 40/20/40 Split Seat): Installation
- Install the rear seat cushion cover.
- Install the hog rings.
- Install the clips.
- Install the rear safety belt buckle.
- Attach the spring.
- Tighten the Torx bolt to 45 Nm (33 lb.ft).
- Install the seat cushion finishers.
- Install the seat front release strap finisher.
- Remove the screw.
- Tighten the screw.
- Install the seat rear release strap finisher.
- Install the inner backrest hinge cover.
- Attach the clips.
- Tighten the screw.
- Install the outer backrest hinge cover.
- Tighten the screw.
- Fold seat assembly rearwards.
- Install the rear seat cushion side finisher.