LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seating >> Seating >> Removal And Installation >> Front Seat Height Adjustment Motor >> Installation

Front Seat Height Adjustment Motor: Installation

  1. Install the front seat height adjustment motor.
    • Tighten the nuts to 25 Nm (18 lb.ft).
    • Connect the electrical connector.
  2. Install the front seat position sensor.
    • Tighten the nuts to 4 Nm (3 lb.ft).
  3. Install the front seat tilt motor.
    • Tighten the Torx bolts to 10 Nm (7 lb.ft).
    • Attach the wiring harness.
  4. Install the front seat electrical connector bracket.
    • Tighten the screws.
  5. Install the front seat backrest assembly.
    • Tighten the Torx bolts to 25 Nm (18 lb.ft).
    • Connect and secure the electrical connectors.
  6. Install the front seat cushion assembly. See Front Seat Cushion .
  7. Install the front safety belt buckle. Refer to Front Safety Belt Buckle article.
scientia non olet · About LEMON Manuals