Seat Track - (Vehicles With: Power Seats): Installation
- Make sure the seat rails are installed as a matched pair as supplied.
- Make sure the seat rails are correctly aligned.
- Install the front seat track motor assembly to the seat rails.
- Install the 4 bolts.
- Tighten the nuts to 10 Nm (7 lb.ft).
- Install the front seat track motor.
- Tighten the nuts to 22 Nm (16 lb.ft).
- Connect the electrical connector.
- Secure the electrical connector.
- Install the front seat base.
- Tighten the nuts to 22 Nm (16 lb.ft).
- Install the front seat base trim.
- Secure in the clips.
- Tighten the screw.
- Install the front seat cushion side trim.
- Secure in the clips.
- Tighten the screws.
- Install the seat control switch.
- Secure in the clips.
- Tighten the screws.
- Install the front seat. See Front Seat .
